Dàta Bunaiteach
Seòrsa Bunasach:
1.Insulated stoidhle stiùiriche singilte
Stoidhle stiùiriche 2.Twin
3. sleeves deireadh corda gun chòmhdach
Caractaran
Tar-roinn iomlan: 0.25 ~ 150mm²
Còd-dath agus tomhas tiùba gu DIN 46228, pàirt 4 (0.5 ~ 50mm²)
Halide an-asgaidh, faodaidh lasair-retardant gabhail ris
Seasmhach teas gu 105 ℃ (PP) 120 ℃ (PA)
Stuth:
99% copar fìor-ghlan
Synthetic: Polypropylene (PP), Polyamide (PA)
Uachdar
Tin-plated gus dìon an aghaidh creimeadh
Òrdaich fiosrachadh
A-nis cuideachd ri fhaighinn ann am bogsaichean plastaig feumail airson riatanasan nas lugha.Ann an suidheachaidhean àbhaisteach chan eil riatanas MOQ againn airson pacadh poca.
Dàta Teicnigeach
Stuth giùlain (ach a-mhàin raon ceangail luath)
| Copar | 99.9% fìor-ghlan |
| Neart tensile | 200 MPa |
| Rangachadh ductile | 35% |
| Stàit Meatailt Deireannach | Pàirt den toradh ceangailte |
| Susbaint ocsaidean | 50ppm aig a’ char as àirde |
|
|
|
| Bras | 30% Sinc 70% Copper |
| Neart tensile | 580 mp3 |
| Rangachadh ductile | 6% min |
| Stàit Meatailt Deireannach | Pàirt den toradh ceangailte |
|
|
|
| Stuth | Tin |
| Susbaint staoin | 99.90% |
| Meatailt eile | Luaidhe + Antimony |
| Sgòthan plating | 1.5 micron |
|
|
|
| Giùlan Coitcheann | 98.5% IACS |
| Resistivity iomlan | 1.738 micro-ohm cm |
|
|
|
| Stuth | PVC dha na h-uile ach a-mhàin nylon 6 no nylon 66 - airson IQC |
| Bholtaids briseadh sìos | 1.5 k V (mion) |
| Frith-aghaidh insulation | Os cionn 100 meg ohms |
| Volt obrach | Suas gu 300V AC / DC |
|
|
|
| Ro-Insulate | -40 ℃ gu +150 ℃ |
| Bras | 145 ℃ |
| Tin plated | 160 ℃ |
SÒNRAICHTE
| Crois-earrann (mm²) | Nì Àir. | Meudan (mm) | AWG |
| Crois-earrann (mm²) | Nì Àir. | Meudan (mm) | AWG | ||||||
| L | W | D | C |
| L | W | D | C | ||||||
| 0.25 | EN0206 | 6 | 1.5 | 1.1 | 0.8 | #26 |
| 10 | EN10-18 | 18 | 5.8 | 4.9 | 4.5 | #8 |
| EN0208 | 8 |
| EN10-20 | 20 | ||||||||||
| 0.34 | EN0306 | 6 | #24 |
| EN10-25 | 25 | ||||||||
| EN0308 | 8 |
| 16 | EN16-12 | 12 | 7.2 | 6.2 | 5.8 | #6 | |||||
| 0.5 | EN0506 | 6 | 1.7 | 1.3 | `1.0 | #22 |
| EN16-16 | 16 | |||||
| EN0508 | 8 |
| EN16-18 | 18 | ||||||||||
| EN0510 | 10 |
| EN16-20 | 20 | ||||||||||
| EN0512 | 12 |
| EN16-22 | 22 | ||||||||||
| 0.75 | EN7506 | 6 | 1.9 | 1.5 | 1.2 | #20 |
| EN16-25 | 25 | |||||
| EN7508 | 8 |
| 25 | EN25-12 | 12 | 9.1 | 7.9 | 7.5 | #4 | |||||
| EN7510 | 10 |
| EN25-16 | 16 | ||||||||||
| EN7512 | 12 |
| EN25-18 | 18 | ||||||||||
| 1.0 | EN1006 | 6 | 2.2 | 1.7 | 1.4 | #18 |
| EN25-22 | 22 | |||||
| EN1008 | 8 |
| EN25-25 | 25 | ||||||||||
| EN1010 | 10 |
| 35 | EN35-16 | 16 | 10.2 | 8.7 | 8.3 | #2 | |||||
| EN1012 | 12 |
| EN35-20 | 20 | ||||||||||
| EN1018 | 18 |
| EN35-25 | 25 | ||||||||||
| 1.5 | EN1508 | 8 | 2.5 | 2.0 | 1.7 | #16 |
| 50 | EN50-12 | 12 | 12.7 | 10.9 | 10.3 | #1 |
| EN1510 | 10 |
| EN50-18 | 18 | ||||||||||
| EN1512 | 12 |
| EN50-22 | 22 | ||||||||||
| EN1518 | 18 |
| EN50-25 | 25 | ||||||||||
| 2.5 | EN2506 | 6 | 3.3 | 2.6 | 2.3 | #14 |
| 70 | EN70-22 | 22 | 15.8 | 14.3 | 13.5 | 2/0 |
| EN2508 | 8 |
| EN70-25 | 25 | ||||||||||
| EN2510 | 10 |
| EN70-32 | 32 | ||||||||||
| EN2512 | 12 |
| 95 | EN95-25 | 25 | 17.3 | 15.6 | 14.8 | 3/0 | |||||
| EN2518 | 18 |
| EN95-30 | 30 | ||||||||||
| 4 | EN4009 | 9 | 3.9 | 3.2 | 2.8 | #12 |
| EN95-34 | 34 | |||||
| EN4012 | 12 |
| 120 | EN120-30 | 30 | 20.2 | 17.7 | 16.7 | 4/0 | |||||
| EN4018 | 18 |
| EN120-34 | 34 | ||||||||||
| 6 | EN6010 | 10 | 4.7 | 3.9 | 3.5 | #10 |
| EN120-38 | 38 | |||||
| EN6012 | 12 |
| 150 | EN150-32 | 32 | 23 | 20.6 | 19.6 | 250/300 | |||||
| EN6018 | 18 |
| EN150-40 | 40 | ||||||||||
| 10 | EN10-12 | 12 | 5.8 | 4.9 | 4.5 | #8 |
| 185 | EN185-32 | 32 | 23.9 | 21.4 | 20.2 | 300/350 |
| EN10-16 | 16 |
| EN185-40 | 40 | ||||||||||
